To properly use a Topcon MSAX total station in an automated settings, you need to ensure the EDM(Electronic Distance Measurement) Sensor and Motor settings are set correctly to return the measurements needed by the control software.
On the Total Station screen tap the config icon.
Then select the 9.Motor menu. Set the following settings:
Auto AIM |
Fine |
Measure ACC |
Advanced |
Track Setting |
Search |
Srch method |
G.S. |
TURN |
60" |
Then go back to the Config menu and select the EDM menu and set the following settings:
Dist mode |
Fine S |
Reflector |
Prism |
Prism Const |
|
Aperture |
|
Ilum. Hold |
|
Light |
|
Light pattern |
|
Comments
0 comments
Please sign in to leave a comment.